Cushions with two plates
and a wrap-round boxing

Unit of Measure	inches	cm
A. Finished Width (?) Intended width of finished cushion. Foam or filler should be oversized by 1% or a minimum of 1/2 inch (1.3 cm). Thus, the foam width will be at least 1/2 inch greater than this measurement and, for wider cushions, 1% of length greater. Close		{{data.UofM}}
B. Finished Length (?) Intended length of finished cushion. Foam or filler should be oversized by 1% or a minimum of 1/2 inch (1.3 cm). Thus, the foam length will be at least 1/2 inch greater than this measurement and, for longer cushions, 1% of length greater. Close	Decimals!	{{data.UofM}}
C. Thickness (?) Foam or filler thickness without compression. Close	Decimals!	{{data.UofM}}
Quantity (?) Total number of cushions needed with these dimensions. Close	Integer!
Fabric Width (?) Useable fabric width -- sometimes called nominal width (often 46, 54, or 60 inches -- 116.8, 137.2, and 152.4 cm) Close	Numbers!	{{data.UofM}}

Include in Rendition: (?) Different fabrics for the top and bottom plates may require partial renditions. Close
Cover	One Plate & Boxing	One Plate

Select Fabric Style: (?) "Vertical Pattern" will run boxing and measurement "B" across the fabric width while "Horizontal Pattern" will run boxing and measurement "B" down the fabric length. "No Pattern" will select plate orientation and run boxing strips to reduce the fabric needed. Close
No Pattern	Vertical Pattern	Horizontal Pattern

The Sailrite Fabric Calculator